In this lesson
Neo Synthwave for coding videos: an arpeggio that stays out of the way
Background sound that keeps changing pitch disrupts memory more than sound that repeats. How to write a synthwave arpeggio that moves without pulling focus.
Updated · 6 min read · Lesson 6 of 6 in Genre Guides
In short
- Background sound that keeps changing pitch disrupts verbal memory more than a repeating sound, so a leaping arpeggio costs a viewer more focus than a narrow one.
- Keep the arpeggio in a small range with gaps in the pattern, and let the harmony move slowly underneath it.
- Watch the delay: a dotted-8th echo with high feedback fills every gap you left, so keep feedback low or filter the repeats.
In this lesson (8)
The tutorial where the music wins
You put a Neo Synthwave track under a 20-minute coding tutorial. The arpeggio runs up and down two octaves in 16ths, a dotted-8th echo bounces between the speakers, and a bright lead comes in every eight bars. For the first minute it makes a static screen feel alive.
Then you try to follow your own tutorial with the sound on. You lose the variable name you were holding in your head, scroll back, and notice that your attention keeps drifting to the arpeggio. A comment under the video says the music is great and impossible to work to.
Why it matters
Background music still uses attention
Coding, reading documentation and following a spoken explanation all keep words and symbols in short-term memory. Background sound can get in the way of that even when you are trying to ignore it. For a creator, music that pulls focus makes the tutorial harder to follow. For someone working to the music, it costs the very concentration they put it on for.
Synthwave makes this easy to get wrong, because its signature moves are about motion: arpeggios, echoes and a soaring lead. The question is which kinds of motion cost attention and which do not.
The science
Changing sounds disrupt more than steady ones
Jones and Macken (1993) asked people to remember lists while tones they were told to ignore played in the background. A sequence of tones that kept changing in pitch disrupted recall. A single tone repeated over and over disrupted it much less. This is what researchers call the changing-state effect: the disruption comes from sound that keeps changing from one moment to the next. Salamé and Baddeley (1989) found that music with vocals disrupted recall more than instrumental music, and in their first experiment both disrupted it more than quiet.
These were memory tests in a lab, not coding sessions, so treat them as a direction rather than a rule. The direction is clear, though. An arpeggio that lands on a new pitch every 16th, across a wide range, is a strong changing-state signal. One that cycles a few close notes is closer to a steady one.
The rhythm matters too. Gaps in the pattern give the ear moments with nothing new to track, while the drums keep the pulse.
Echoes add notes. A tempo-synced delay is part of the synthwave sound, and at 100 its times follow from one beat lasting 60,000 / 100 = 600 ms.
Brightness is the last lever. A on the arpeggio takes the edge off each new note and pushes the part behind the pad. Sweep one here and listen to how far down the cutoff can go before the part loses its shape.
Listen
Shape a sound with a filter
Chords and soft noise, or a real mix, through one filter, with the spectrum drawn live. Sweep the cutoff and raise the resonance.
Start with your speakers or headphones low.
Try it
Test your arpeggio on your own memory
This is a rough version of the lab task. It will not prove anything, but it makes the effect easy to notice.
0 of 6 steps done
Common mistake
Building every bar like a trailer
You write the cue as if it were a 15-second trailer: a wide arpeggio, a big snare, an echo on everything and the lead playing all the time. Each of those works as an event. Running for twenty minutes, they keep pulling the viewer away from the screen.
The second mistake is fixing the arpeggio and forgetting the delay. A narrow, gapped pattern with a dotted-8th echo at high feedback ends up as busy as the one you replaced, because every repeat is another note in the gaps.
The third mistake is the lead. A bright lead line that changes pitch on every note is the most changing sound in the mix. Save it for a moment the edit has earned, like a product reveal or a finished build.
Takeaway
Motion with few surprises
Let the harmony and the filter move slowly, and keep the note-to-note changes small. A narrow, repeating arpeggio with gaps, a low-feedback echo and a lead held back for the big moments still sounds like synthwave. It just gives the viewer room to think.
Low-pass filter
A filter that removes energy above a cutoff frequency and lets everything below it through.
3 questions
Check yourself
Sources
Show all 2Hide sources
- Jones, D. M., & Macken, W. J. (1993). Irrelevant tones produce an irrelevant speech effect: Implications for phonological coding in working memory. Journal of Experimental Psychology: Learning, Memory, and Cognition, 19(2), 369-381.
- Salamé, P., & Baddeley, A. (1989). Effects of background music on phonological short-term memory. The Quarterly Journal of Experimental Psychology Section A, 41(1), 107-122.
Lesson 6 of 6
You reached the end of Genre Guides
That was the last of 6 lessons in this path. The next path is Sound Design, 10 lessons.
Sound Design, lesson 1Timbre tells the brain what arrivedPitch says which note. Timbre says what is playing it, and listeners hear it in a fraction of a second. Choose the sound before you polish the melody.
Written by Virzy Guns
Songwriter and producer, founder of Virzy Guns Production. Now building HealingWave.